Overview of Green Wireless Networks

Overview of Green Wireless Networks Abstract: Traditional mobile networks largely focus on availability, variety, stability and large capacity. Due to the rapid development of Information and Communication Technology (ICT) industry whose major constituent are the mobile networks, CO2 emissions have been increasing rapidly. This shows the need for energy efficient wireless networks or green wireless networks which will put emphasis on saving the energy and environmental protection. The current wireless networks concentrates mainly on non-energy related factors such as Quality of Service (QoS), throughput and reliability. So these factors have to kept in mind while transitioning to green wireless networks. The techniques that need to be implemented are aimed at improving energy efficiency but not compromising the QoS, throughput and reliability.   In this paper the various metrics which help in evaluating performance of wireless networks are reviewed. Also different approaches to improve energy efficiency in wireless networks an d how to combine them for higher energy efficiency are discussed. Introduction: The latest mobile phones provide multiple services which led to rise of ICT traffic. ICT constitutes for 2% of total Green House Gas (GHG) and CO2 emissions worldwide. Within the ICT sector, mobile sector was responsible for 43% of emissions until 2002 while studies suggest that this number would go up to 51% by 2020 [1]. The predominant energy consuming part in a wireless network is the Radio Access Network (RAN). This comes from the fact the RF power amplifier within the RAN consumes a lot of input power for operation and releases a lot of heat contributing to energy wastage. In addition to this, the inconsistent distribution of real world mobile traffic among the BSs leads to underutilization of supplied energy [1]. These two reasons give us an idea of where the energy is being wasted or not utilized, helping us in formulating new techniques for energy efficient wireless networks. While discussing about various techniques for energy efficiency, we have to keep in mind that the QoS is not compromised at all. Because if an operator uses a technique, they should be able to serve the users by utilizing less energy but not by compromising users service. The various parts of a mobile network that consume power are data centers in backhaul, macro cells, femtocells, mobile stations or end hosts and their services. But the major part that consumes the highest power is the power amplifier section and Base station or RAN section. Hence the various techniques presented in this paper are aimed at energy efficiency in these sections only. Section II of the paper outlines various metrics which can be used to evaluate the energy performance of systems. Section III discusses cell layout adaptation techniques for reducing energy consumption and is divided into 3-subsections that outline various cell shaping algorithms. Section IV explains some challenges and research directions for energy efficient networks like Cognitive Radio (CR), M2M communication etc. Metrics for measuring energy performance: Energy efficiency can be achieved by employing better techniques. But in order to measure the energy consumption or utilization, metrics are needed. Energy efficiency metric can be defined as ratio of output to the input power supplied [1]. The output here may correspond to how much the distance of transmission is, number of bits transmitted or output power etc. The metrics for energy efficiency are broadly categorized into 3 levels: Component level metrics, Access node level metrics and network level metrics. Component level metrics mainly focus on power amplifier section, Access node level metrics focus on RAN or Base station, and network level metrics focus on performance of RAN [1]. These metrics help to quantify energy efficiency of various devices and therefore it becomes easier to compare which technique is better. Firstly, at the component level, where we focus on power amplifier section, there are 2 possible types of metric categories. One is Analog and the other is digital. The two important metrics of analog RF transmission are Power Amplifier efficiency (PA efficiency) and Peak to average power ratio (PAPR). PA efficiency is the ratio of PA output power to the input power supplied to it. Higher value of PA efficiency is desired, but in reality this is the part where most of the input power is wasted. PAPR, as the name suggests is the ratio of Peak power to average power. Lower value of PAPR is desired, as higher values tend to reduce the amplifier efficiency. The significant digital metrics in component level are millions of instructions per second per watt (MIPS/W) and millions of floating point operations per second per watt (MFLOPS/W). Higher value of MIPS/W and MFLOPS/W are desired as they refer to digital output generated for a given power input [1]. Secondly, at access node level there are 2 major metrics. Power efficiency and radio efficiency. Power efficiency refers to transmitted data rate over a given bandwidth and input power supplied. It is measured in bits per second per hertz per watt (b/S/Hz/W). Radio efficiency refers to transmitted data rate and transmitted distance over a given bandwidth and input power supplied. It is measured in bits meters per second per hertz per watt (b-m/S/Hz/W) [1]. Higher values of power and radio efficiency are desired as they measure the data rate and distance of transmission which are always desired to be a higher value for a given power input. Finally, at the network level also there are 2 metrics which measure the number of subscribers served during peak hours and coverage area respectively. The first metric measures the number of subscribers served during peak hour to the supplied input power and is measured in number of subscribers per watt (Subscribers/W) and the second metric measures the coverage area of the radio signal to the supplied input power and is measured in square meters per watt (m2/W) [1]. Higher values for both these metrics are desired as they signify serving more number of subscribers or a larger coverage area for a given power input. Hence when evaluating various techniques for wireless energy efficiency, it is better to know at whether energy efficiency is augmented in component level or access node level or network level. That way it would become easier to compare the efficiency in terms of various levels individual metrics. Reducing Energy consumption through Cell Layout Adaptation: Cell layout adaptation (CLA) techniques focus on energy efficiency at network level. But for these techniques to improve energy efficiency, it is important to improve efficiency in component level and access node level as well, because all these 3 levels are inter-related to each other and one works on the basis of another. Power is first supplied from power amplifier and then to RAN and at last to the network level, that means it is possible to save more energy in component level and access node level and the remaining energy that is used by the network can be efficiently utilized by implementing these cell layout adaptation techniques. CLA techniques are basically divided into 3 major categories. First part consists of cell shaping techniques like Base Stations (BSs) turning off and cell breathing, second part consists of hybrid macro femtocell deployments and the final part consists of relaying techniques [1]. A. Cell Shaping Techniques: As mentioned earlier, base stations turning off and cell breathing techniques encompass cell shaping techniques. The basic idea behind the former is turning off BSs and redistributing the remaining traffic to neighboring base stations. Here we need to make sure that we are turning off BSs which are idle or the ones which have very less traffic that can be taken up by neighboring cells. This way energy consumption is reduced and only the BSs that have traffic will operate and consume energy. Cell breathing scheme goes one step further by not actually turning off BSs, but by reducing the power consumption of a cell. This can be achieved by covering a low distance depending on the traffic. That means BSs experiencing higher traffic operate in full power mode while the BSs with medium traffic operate in medium power mode and cells with very less traffic operate at low power mode, thereby reducing the coverage area depending on subscriber traffic. This is analogous to a cell breathing acc ording to traffic patterns. As these cell shaping techniques are based on network level, number of subscribers served and coverage area metrics should be maintained in order to ensure good QoS and less call drop rate when implementing these techniques. The broader explanation of cell shaping techniques is mentioned above, but to implement those techniques there are 2 major algorithms: switching-off network planning algorithm and cell breathing coordination algorithm [1]. Firstly, switching-off network planning algorithm works on the basis of 3 factors, number of BSs to turn off, number of BSs to operate, and time period for which BSs are turned off. The ratio of number of BSs to turn off and BSs to operate and a specific time period for which turn-off is implemented based on the low traffic pattern is calculated. Once these values are calculated, it is made sure that the blocking probability limit is not exceeded, which means definite QoS is maintained. Cell breathing coordination algorithm works on the basis of a central node called a cell zooming server. The cell zooming server analyzes the incoming traffic and tries to turn of the BSs which do not have any traffic at all. Then it tries to distribute the traffic from less active BSs to busy BSs. It also makes sure to distribute traffic based on input traffic and turns on the sleep mode BSs when required. This centralized approach works good in smaller networks and when it comes to large scale networks, it would be very ineffective. The same applies to switching off network planning algorithm because there is no centralized node to turn on the BSs if needed, as the turn -off time if fixed based on traffic patterns [1]. The cell shaping techniques also bring up a new trade-off, i.e. SE-EE tradeoff (spectral efficiency-energy efficiency) [3]. SE-EE trade-off focuses on network level characteristics like number of subscribers served and coverage area for input power supplied. By implementing these cell shaping techniques although energy efficiency is obtained, there is always chance where coverage area is reduced and some subscribers are ignored. Ideally, higher the energy efficiency lower is the spectral efficiency. But in reality, because of component level energy issues, transmission distances, coding schemes the relationship between SE and EE is not inversely proportional, but it is of the form of a bell curve. So it is better to apply cell shaping techniques until the point where spectral efficiency is not compromised. B. Hybrid macro femtocell deployment: Femtocell deployment in combination with macro cells is a second method under cell layout adaptation. Femtocell deployments provide coverage in the order of 10 meters and utilize a small BS, which requires less power to operate. Femtocell deployment is advantageous as it provides good coverage and QoS to a set of users within its range with less operating expenses when compared to a macro BS [1]. Although femtocell deployment is a good concept, it is not desirable to have too many femtocells as it increases the power consumption and utilizes more network resources for a lesser coverage area. A better way of deployment is having hybrid macro and femtocell deployment. In the case of hybrid deployment, the macro BS provides coverage to users who are evenly spread over a long distance and the femtocell provides coverage to users who are located in a dense region. This way the energy is utilized efficiently, as a new macro BS is not being deployed to provide coverage to those dense set of users. The hybrid macro cell and -femtocell deployment poses a new challenge for handoffs, as macro BS and femtocell BS might have same signal strength in the others coverage region. The handoffs issue can be solved by defining a clear boundary between the macro and femtocell BS. Within the dense region, the femtocell should have higher signal strength and it should properly handoff at the bounda ry of macro BS. Also within the coverage area of macro BS, the femtocell BS should have very less signal strength [1]. This would give a clear idea to define a boundary. A better way of implementing this hybrid deployment is by utilizing the cell shaping techniques like BS turning off and cell breathing coordination. If there are a set of femtocells, and one of the coverage area is totally idle, then that femtocell BS can be turned off and basic coverage is provided by the macro BS at that location. Similarly, if incoming traffic is analyzed, femtocells and macro cells can use the cell breathing techniques to lower their power utilization [1]. Also the hybrid macro and femtocell deployment leads to a DE-EE tradeoff (deployment efficiency-energy efficiency) [3]. Ideally energy efficiency increases when more femtocells are deployed and deployment efficiency goes down because of increase in deployment expenses, network utilization and energy consumption. In a practical scenario, the relationship between DE and EE is more like a bell curve, with a peak point where deployment and energy efficiency are in good standing. Hence it is a good idea to use hybrid deployment until the point where it does not degrade the deployment efficiency and energy efficiency. C. Relaying techniques: Energy efficiency can be achieved through 2 types of relaying techniques. The first technique uses repeater stations or green antennas for relaying and the second technique uses mobile stations for relaying. In the first technique, a repeater station or a green antenna with receiver capability is connected to the macro BS through a coax cable or optical fiber, with the latter utilizing less energy. These green antennas are placed very near to the mobile stations, which helps to reduce the energy consumption in uplink by the mobile stations. Although this technique improves energy efficiency for mobile stations, it increases operating expenses for the service provider. In the second technique, the mobile stations work in coordination and perform the relaying operation. This way the transmission distance for the macro BS is reduced and it consumes less energy. Although this technique assumes mobile stations as relays which work selflessly. Practically, the mobile stations may not work in coordination which would break the link for relaying. One more drawback of this technique is that for maintaining coordination between the mobile stations, more energy is consumed [1]. Challenges and directions for energy efficient wireless networks: Cognitive Radio (CR) and M2M (Machine to Machine) communication systems provide new opportunities in the field of green wireless networks, but also pose significant challenges at the same time. Cognitive Radio can be defined as a RF transceiver that is used to switch users from a very busy spectrum to an unused one and vice versa if needed. The origin for this topic came from the fact that many RF spectrums are congested with several users and some other spectrums are underutilized. Hence the concept of CR would efficiently manage users in various spectrums and help to deliver better QoS. Indirectly this switching of spectrums or utilizing unused spectrums is resulting in energy efficiency as spectrums with more users will not utilize additional energy as users are transferred to other spectrum. Also underutilized spectrums which were consuming energy for operation, now serve the new users efficiently resulting in energy and spectrum utilization. The only disadvantage of CR technique is that monitoring various RF spectrums and switching users from one spectrum to another requires significant energy. Hence this technique would be energy efficient only if more energy is saved by intelligently switching users than that is utilized for monitoring spectrums or users [2]. M2M wireless communication systems are aimed at connecting various wireless devices directly. This approach also helps in reducing energy consumption from the point of view of a mobile station. M2M helps to reduce the computation required by various physical devices and also tries to offload them to the network itself. This way the mobile stations consume less energy as the number of computations is reduced. The major disadvantage with this approach is that if more computation is offloaded to the main network, it might consume more energy that that is being saved by mobile stations by utilizing this approach. Hence this technique would be energy efficient if the main network does not consume a lot of energy for some additional computations [2]. Conclusion and Future Scope: The rise in carbon footprint, especially the contribution to it from the ICT sector and consequently mobile sector led to interest in energy efficient wireless networks. Energy efficiency can be achieved at various levels such as power amplifier, RAN and network. The techniques proposed in the paper focus on energy efficiency in RAN and network levels. But they also have trade-offs like DE-EE and SE-EE, which can be vanquished by emerging techniques like CR and M2M communications. These emerging techniques can be improved in a way where they consume less energy for monitoring in comparison with the prevailing levels. Alongside that, at the power amplifier level, the current solution for energy efficiency is to use expensive components which would trade off the gains achieved by energy savings. Hence a future research direction would be addressing energy efficiency at power amplifier level and improving CR and M2M techniques. VI. References: [1] Luis .S, Nuaymi .L, and Bonnin .J, An overview and classification of research approaches in green wireless networks. Eurasip journal on wireless communications and networking 2012.1 (2012): pp.1-18. [2] Xiaofei .W, et al. A survey of green mobile networks: Opportunities and challenges. Mobile Networks and Applications 17.1 (2012): pp.4-20. [3] Yan Chen; Shunqing Zhang; Shugong Xu; Li, G.Y., Fundamental trade-offs on green wireless networks, in Communications Magazine, IEEE , vol.49, no.6, pp.30-37, June 2011.

Structural Rationalism

In the advent of industrialization which is marked by the affordability and mass production of construction of materials like iron steel and glass, an architectural school of thought emerged known as structural rationalism which emphasized the important and distinctive role of structural efficiency in the form of buildings including space requirements and architectural design.This philosophy was promoted by French architect Eugà ¨ne Viollet-le-Duc whose theories were specifically written in his book, Discourses on Architecture (Frampton).     Viollet-le-Duc adhered to the restoration to the localized style of building vis a vis the ‘abstract’ international style conspicuous during his time.Belgian architect Victor Horta is one of the pioneering advocates of this architectural philosophy which he exemplified in the design of the Tassel Hotel in Brussels in 1892.The design featured exposed decorative iron balustrades shaped as a plant filament combined with local axia l plans that resulted to a simple yet striking decorative work of art. Interior architecture involved rooms with irregular shapes blended with decorative painting and furniture.The masterpiece of Horta marked the commencement of the Art Nouveau movement which was perpetuated and advanced by Hector Guimard, a French architect and furniture designer.   (Pile) While maintaining highly decorative curved line that usually follows a floral pattern, Guimard highlighted indigenousness of design that conformed to function and climate and even patriotism.Guimard’s most famous designs are the entrances of the metro subway stations in Paris that featured metal cast in curvilinear flowerlike lines meticulously designed in detail.By the early 20th century, Dutch architect Hendrik Petrus Berlage adhered to a return to the conservative objectives of true constructive rationalism that stressed simplicity of form and clarity of structure.He underscored the notion that the structure itself fu nctions in the creation of space which reduce the need for decorative structures.   This idea was embodied in the design of the Amsterdam Stock Exchange of 1903 and initiated the emergence for modernism.BIBLIOGRAPHYFrampton, Kenneth. Modern Architecture: A Critical History. Oxford University Press, 1980Pile, John F. A history of interior design. Laurence King Publishing, 2005

Essay on The Role of Women in the Epic of Gilgamesh

The Role of the Women in the Epic of Gilgamesh Stories reflect and mirror culture. Some writers write about how things currently are in their own society and the position that certain people hold in that society. It is because of that kind of thought and style of writing that a reader can learn and in some ways better understand the hierarchical position of peoples in a society at a particular time in history. In ancient Mesopotamia, women had fewer privileges and rights then the men. Despite their lack of rights and privileges, women in high position were viewed as temptresses, tamers, and a essential part of Mesopotamian culture. The harlot plays a very important role in the development of this story. It was because of†¦show more content†¦The harlots duty was to tell Enkidu about civilization and lead him out of the wilderness and into civilization. The woman describes the power of the king of Uruk to the beast Enkidu, and Enkidu desires to encounter this king and test his strength against the kings. For six days and seven nights they lay together, for Enkidu had forgotten his home in the hills (65). Thus, it was the woman who led Enkidu to Gilgamesh and allowed them to clash and then become friends. Without the role of the harlot and her power to lure men, the two gentlemen would have never met and in a sense Gilgamesh probably would have never gone on his quests for immortality. Gilgamesh recognizes the strength of the harlots charm, however while he recognizes that, he fails to recognize anything else regarding women. He sleeps with all the women in his land and takes them out of their home to be his brides. His lust leaves no virgin to their lover, neither the warriors daughter or the wife of the noble (62). It is because of this that Enkidu challenges Gilgamesh by saying, I have come to challenge the old order, for I am the strongest here (68). Enkidu recognizes the importance of women and their right to be with their families. The role of women in ancient Mesopotamia was that of a homemaker, and to destroy or corrupt the homemaker one can destroy and/orShow MoreRelatedThe Role Of Women In The Epic Of Gilgamesh1189 Words   |  5 Pages The Epic of Gilgamesh follows a tale of two brothers tasked with defeating an all-powerful beast, yet they aren’t the most important characters in this story. Without their wisdom and guidance, Gilgamesh and Enkidu’s journey would have ended a lot sooner, and Gilgamesh would have still rampaged in Uruk, never bringing peace to those who were below him. Aruru, Shamhat, Ninsun, Ishtar, Siduri, and Utanapishtim’s wife all contribute to Gilgamesh’s journey, and in the end, provide Gilgamesh with theRead MoreThe role of women in The Epic of Gilgamesh1552 Words   |  7 PagesThe role of women is a very important topic in The Epic of Gilgamesh, and various women are chosen to represent various aspects of the mesopotamian conception of women. In the ancient times males were inessential to the preservation of life. The Epic of Gilgamesh shows how the inability of males to give birth causes a sense of despair and alienation. While the representation of women might seem confusing at first with its wide range of traits, the epic tries to demonstrate all aspects of womenRead More The Role of Women in The Epic of Gilgamesh Essay799 Words   |  4 Pagesstarts off with Gilgamesh, the King of Uruk, who is one third man and two thirds god. This story is about a mans quest for immortality in addition to the importance of boundaries between the realms of animal, man and gods. Women symbolize the importance of locative boundaries in the text. These boundaries are set by the harlot Shamhat, Ishtar, Siduri, the tavern keeper, Ninsun and Utanapishtims wife. By giving women this role of wisdom and boundary enforcement, The Epic of Gilgamesh reflects how MesopotamianRead MoreEssay about The Role of Women in the Epic of Gilgamesh1125 Word s   |  5 PagesWhat if women ruled the world? The question does not seem so strange today as it may have back in 2500 B.C.E., an age when people tell stories of the Great King of Uruk--Gilgamesh. Although the story of â€Å"Gilgamesh† revolves around themes of masculinity and brotherhood--with its male prerogative, its composers develop several strong female characters which suggest women have great influence in a male-dominated, Mesopotamian society. The first female character that influences a man is the prostituteRead More Role of Women in The Epic of Gilgamesh Essay959 Words   |  4 Pages2700 years ago there lived a king by the name of Gilgamesh who ruled the city of Uruk in Mesopotamia now known to us as modern day Iraq. Parts of his life are written on clay tablets believed to be the oldest existing written story of a man’s life. (XI). â€Å"The epic of Gilgamesh†, is the story of his quest for eternal life. In this paper I will be writing about the influence that the women in his life have played in his quest. The women are, Shamhat, Ninsun, Ishtar, and, â€Å"The tavernRead MoreRoles Of Gilegosh And The Power Of Women In Gilgamesh1440 Words   |  6 Pagesmen over women varied greatly, with women typically being in the position of less power and influence. Although women seem to play a less apparent role, women are essential for both the continuation of life and the nurturing of the future, signifying that the power of women is very potent. The women of Gilgamesh are goddesses, priestesses and a variety of other roles, each with their own set of skills, guide Gilgamesh throughout the epic. Despite the perception of some scholars that the women of GilgameshRead MoreThe Epic Of Gilgamesh : The Struggle For Women1183 Words   |  5 PagesThe struggle for women to play a significant role in history can be traced from the ancient Mesopotamians to the 1900’s. There has been a continuous battle for women to gain equal rights legally and to be treated equally in all aspects of life. The Epic of Gilgamesh contains some of the oldest recorded accounts of the roles of women and their importance in a functional society. Women have been viewed as anything from goddesses to unwanted servants throughout history, regardless of a variety of changesRead MoreGender Inequality In Gilgamesh Essay1339 Words   |  6 Pageshas always been a gender inequality separating the roles and power of men from women. Most societies were patriarchal, emphasizing male dominance in society and directing women towards a more idle role so that they were more ornamental than influential. Through this gender division, women would take on the less powerful role as a nurturing mother, or caring wife over and over again in several ancient societies up to modern day societies. In Gilgamesh, male characters are emphasized much more thanRead MoreThe Epic Of Gilgamesh By William Shakespeare876 Words   |  4 Pagesstory, known as the world’s oldest written tale, is The Epic of Gil gamesh. This poem happens to be from that very time period in Mesopotamia and it clearly exhibits the values and views of the people from that era. It achieves this through Gilgamesh’s behavior at the beginning of the tale, the way in which women are perceived, and the heavy role played by the gods throughout the entirety of the epic. The first way in which The Epic of Gilgamesh succeeds in portraying the ideals and principles ofRead MoreThe Epic Of Gilgamesh By Andrew George And Monkey Essay1380 Words   |  6 Pagesexasperating. Women who express their sexual sides are viewed as loose, disrespectful to themselves, or despicable. People often forget that women can be powerful and sexual beings. Women in society, nowadays and even three thousand years ago have always dealt with these problems simply because they are not male. A woman could show complete class, intelligence, and ambition and portray herself to be a powerful or even sexual being and she would still be given a hard time. The Epic of Gilgamesh translated

The Theory Of Drug Use - 1584 Words

On Intervention Canada, Aimee a 26 year old from Ottawa Ontario, has been diagnosed with addiction to Fentanyl. Fentanyl is a prescription painkiller 100 times more powerful than morphine. The drugs come in a patch form which is boiled down until there is nothing left. Her addiction consists of a shot of the drug every six hours which she does with a hypodermic needle that gives her a sense of â€Å"high† or euphoria. She has been doing it for the last two years because she feels desperate and upset about her life and this drug gives her the feeling of relaxation. The purpose of this paper is to apply theories of drug use discussed in class to a real case of addiction as depicted in the Intervention video. The three theories related to Aimee’s†¦show more content†¦For example, a child throws a fit, a reward for displaying alternate behaviours and punishing the tantrums will help change how the child behaves in the future (Norman, 2015). To explain human behavi our we place great emphasis on cognitive processes which demonstrates the assumption that we learn primarily by observing and listening to the people around us; the social environment. The continued use of the drug occurs in regards to this theory because it shows that people do whatever they must in order to feel pleasure. Humans are pleasure seekers they will do anything to feel good even if that means harming ones self in the process. Positive reinforcement, is probably the most familiar model of addiction because this theory states that users will say they take drugs because they enjoy using them (Newton et al, 2009). In the episode, Aimee shows that taking Fentanyl makes her feel better about her life and less depressed. This is seen as negative reinforcement because she seeks pain avoidance which is demonstrated by the repeated usage every 6 hours. The effects of exposure to drugs on child development create an antisocial behaviour that it seen as normal in the future. Aimee h as become so used to taking Fentanyl that her body has become addicted to the drug. Without the drug, Aimee cannot function properly therefore making her dependent on the drug. She brings herself to the point of relaxation and calmness where she is not even capable